REVERSE LAMINAR AIR FLOW ( RLAF )

Treat's Concept Systems: Pioneering Excellence in Modular Clean Room & HVAC Services

Booth for product’s sampling and dispensing are design as open front containment systems with built – in scavenging arrangement that draw power aerosol away from the operator and the operating environment, protecting product & Personnel.

Reverse Laminar Air Flow (RLAF) is a specialized system used in cleanrooms and laboratories to maintain a sterile environment. Unlike traditional laminar airflow, which blows air in a horizontal direction, RLAF blows air in a vertical direction from the ceiling to the floor. This creates a downward airflow that helps prevent particles or contaminants from entering the sterile area. RLAF systems typically use high-efficiency particulate air (HEPA) filters to remove airborne particles, ensuring the air is as clean and pure as possible.

Description – REVERSE LAMINAR AIR FLOW ( RLAF )
Supply Filter	imported minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency ratting better than 99.999% for 0.3 micron.
Exhaust HEPA filter	imported minipleat HEPA filter with hot melt technology, which conforms to EU-14 Grade at supply position with an efficiency ratting better than 99.999% for 0.3 micron.
Intermediate Filter	Intermediate filter are made from non-woven synthetic with HOPE mesh: conforms to EU to EU 7 Grade, with an, efficiency rating better than 95% down to 3 micron.
Pre-filter	Pre-filter are made from Non-Woven Synthetic with HOPE mesh; conforms to EU 4 Grade, with an efficiency rating better than 90% down to 10 micron.
Motor blower assembly	Motor blower designed to statically and dynamically balanced for supply of sufficient capacity and static pressure to take care of airflow requirment for entire life of HEPA.
Diﬀerential pressure gauge	Dwyer Make Magnehelic Gauge (0-23mm:2 Nos) to monitor pressure drop across HEPA & Intermediate filter and (0-10 mm 1 No.) across prefilter.
Lighting	Fluorescent Light (250 Lux) at work surface
ON/OFF Switches	SS ON/OFF Switches for motor & lights
Switch socket ‘	6/15 amp single-phase switch socket use for external equipment
Control Panel	Electrical control panel mounted on the side panel of the unit.
DOP Port	DOP test port at upstream of HEPA filter integrity test. ( With PAO Solution)
Side Panel	SS 304 Double walled side panels.
Electrical supply	Electric Supply 230V AC 1-Ø 50HZ/415V AC 3-Ø 50HZ
Noise Level	Less than 67 dB on Scale ‘A’ when Ambient is not greater than 55 dB on Scale ‘A’
Vibration Level	Minimum

REVERSE LAMINAR AIR FLOW ( RLAF )

REVERSE LAMINAR AIR FLOW ( RLAF )

Treat's Concept Systems: Pioneering Excellence in Modular Clean Room & HVAC Services

Your Trusted Partner in Progress - Treat's Concept Systems Pvt. Ltd.

Phone

General Email

Enquiry Email

24x7